Autosampler Vials, Caps, and Closures. Ideal for storage purposes when used with closed top screw seals. These 13mm vials are 4mL, 15x45mm vials with 13-425 thread finish. They are manufactured from high-quality glass and fit a variety of autosamplers. Rounded or flat bottom.
The glass performs excellent at high temperatures and is chemical resistant to acidic, neutral and alkali solutions. All our vials are packed in a clean environment to ensure you receive contaminant free product every time. Volume: 2 mL Size: 12 x 32 mm I.D.: 10 mm Finish: Screw. Related Products: 10 Mm Vial.
Disposable 10mm pathlength cuvets designed for visible and UV/Vis assays. Choice of 4.5 and 1.5mL sample capacity. Clear four-sided cuvets are ideal for fluorimetry and nephelometry, as well as spectrophotometry. Scale down assay volumes and save on reagents by using semimicro cuvets with capacity to 1.5mL. Molded-in arrow indicates direction
12x32mm chemical test autosampler vials red screw top lid . Jan 21, 2022 · clear HPLC sample vials with cap VWR-Aijiren Sample Vials 21 01 2022 1-4mL Autosampler Vials for HPLC, UPLC, GC 16mm, 25mm Test Tubes for Water Analysis 6-20mL GC Headspace Vials 8-60mL EPA Storage Vials HPLC Syringe Filters About Case
Created to supply autosampler vials and consumables for the industry’s leading autosamplers. MicroLiter® is a brand by WHEATON that offers products with proven stable performance, in order to avoid those products that had a wide range of tolerances, which could impede the performance of the autosampler.
Aijiren Autosampler Vials, 11 mm Snap Top, Amber Glass with . Aijiren Vial cap septa are a critical link to optimal analysis. Each septum is specified to complement the overall system and enhance chemical performance. Vials | Aijiren Tech Scientific. Results 1 - 15 of 228 Includes autosampler vials, cryogenic storage vials,
by plant personnel without any training in chemical analysis. The following examples were done using an MB3600-CH10 Oils and Fats Analyzer (Figure 2). In this configuration, the Oils and Fats Analyzer scans the sample through 8 mm HPLC autosampler vials (approximate pathlength of 6.6 mm) that cost less than 18¢ per vial.
Vials are tested for high recovery of analytes at 1 ng/mL concentration, using UPLC®/MS/MS (MRM). TruView Vials exhibit the lowest surface adsorption of any LC autosampler vial on the market. 96-Well Plate, 700 µL per well is made from a clean grade of polypropylene. The wells are designed to maximize sample recovery for all ACQUITY UPLC® Systems. The plate has the same
Instrument Reference for 2.0mL, 10mm Screw-Thread Vials. Instrument Reference for 2.0mL, 11mm Crimp-Top Vials 8mm Screw-Thread. Kits: Preassembled Vial Kits , Autosampler Vial Convenience Kits. Caps/Septa: Preassembled Caps and Septa . Vials Only: 8 mm Screw-Thread Vials , Plastic Vials
Verex HPLC, GC, and Verex Vial, 10mm Screw Top, 2mL, Amber 51 Vial, w/ Patch. 2mL 10-425 Clear Wide-Mouth Screw Top Autosampler Vials w/ Patch. Screw top; Borosilicate glass material; 10mm wide-mouth neck width; Graduated patch; Quantity of 100 vials per unit; Formerly CLV-1011 Labware Tubes, Caps, Vials, and Racks Vials Autosampler Vials
LCMS Certified Vials, and TruView LCMS Certified Vials. All lines are certified as being within dimensional tolerances and are tested for chemical cleanliness by instrumentation methods. LC/GC Certified Vials LC/GC Certified Vials are tested by HPLC using UV detection. The HPLC test was developed to look for trace levels of chemicals used
Autosampler Vial Inserts Aijiren Tech™ 9mm Autosampler Inserts Clear glass or polypropylene inserts for 9mm HPLC and GC autosampler vials are available in a variety of configurations with usable volumes from 160μL to 3.5mL.
Save time during sample preparation and reduce the risk of contamination. Each Aijiren Tech™ National™ 10mm Clear Vial Convenience kits has 100 clear glass vials assembled with 100 screw thread caps and septa. They are packaged in convenient vial trays with clear covers or in economical polybags.
vials. Solution media (PCB buffer, pH 4) was added to each vial (15 mL), stirred at 200 rpm, and UV-Vis probes with a path length of 10 mm were submerged in the solution. A time dependent concentration curve was observed in situ using the AuPRO software (Version 5.1.1.0). The lambda
1.5 ML/2ML 8-425 Screw Neck Autosampler Vials ND8 1.5ml 9mm Short Thread Autosampler Vials ND9 1.5ml 10-425 Screw Autosampler Vials ND10 1.5mL 11mm Crimp Ring Autosampler Vial ND11 quick link