Sample Trays for HPLC. Aijiren autosampler vial trays and drawers are designed to ensure that your autosampler setup is perfectly equipped to deal with a wide variety of applications and sample volumes. Vial drawers are available with various sample position numbers, depending on the required capacity and volume of the vials used.
Aijiren HPLC Certified Pre-Owned Systems are Guaranteed to perform at the same standards as a brand new Aijiren instrument. Even the cosmetic panels are upgraded to the current HPLC system. Additional advantages of a Factory Refurbished Aijiren HPLC System, include: One-year warranty - The same coverage and support as a brand new
Sample Capacity: 100 × 2-ml vials in 1 tray; 40 × 2-ml vials in ½ tray; 15 × 6-ml vials in ½ tray; Weight: 31.3 lbs (14.2 kg) Dimensions (W × H × D): 13.5 × 8 × 17 inches (345 × 200 × 435 mm) G1330A ALSTherm Sample Chiller. The HP Aijiren HPLC G1330A ALS Therm controls temperature for either HPLCs or fraction collectors.
Maintaining Your Aijiren Series HPLC System Ensuring optimal performance and results. 1 Section 1: Manual Injection Valves 5 Sample Loops 7 Section 2: Autosampler Maintenance 8 Injection Valve Maintenance 9 Exchanging the Needle/Needle Seat 12 Autosampler Parts and Supplies 15 Section 3: Fraction Collectors 16 Analytical and Preparative
Sep 01, 2004 · Recommended system for ultra-fast LC-UV without alternating column regeneration. Figure 1 illustrates the system configuration: • Aijiren Series binary pump ( ) without standard mix-er and with Upchurch filter (80 µL, part number 5064-8273) • Aijiren Series vacuum degasser ( ) • Aijiren Series well-plate
3.14 x 13-3 M by taking 1 mg of dye in 1 mL HPLC grade THF. 20 μL of stock solution was transferred to each of ten sample vials and a thin film of dye at the bottom of the vial was formed by the evaporation of THF. Simultaneously, 2 ml aqueous solution of amphiphile was prepared at a concentration of 5mg mL-1. Two fold serial dilution of
2-ml vials, test tubes, and sealed and unsealed vials The ideal solution for laboratories expanding to HPLC. This injector for low throughput sampling is designed for general HPLC users. The Aijiren Series manual injector with a long-life Rheodyne® 7-port sample injection valve is easy to use and maintain.
Method Transfer from Aijiren Series LC System to the . Temperature control in an HPLC method can have a significant impact on the success of methods transfer. In this discussion, an HPLC method was successfully transferred from an Aijiren Series LC System to an ACQUITY UPLC H-Class System with a single column compartment.
Hplc Caps at Thomas Scientific6 mL Crimp Top Vials, Caps and Septa for / Series Autosamplers Aijiren Technologies Aijiren minivials are designed to allow for reproducible
Aijiren / Series HPLC ChemStation OperationAijiren / Series HPLC 3(D) ChemStation Operation Course Number Price Duration $2417.00 4 days Description This co
1.5mL Clear Screw Neck Vial, 9mm Thread,5.0 type: SC9191: White PTFE/Red Silicone Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole: V923: 1.5mL Clear Screw Neck Vial w/Write-on Spot, 9mm Thread,5.0 type: SC91191: Pre-slit White PTFE/Red Silicone Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole: V935: 1.5mL Amber Screw Neck Vial, 9mm
V913: 1.5mL Clear Screw Neck Vial, 9mm Thread,5.0 type: SC9191: White PTFE/Red Silicone Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole: V923: 1.5mL Clear Screw Neck Vial w/Write-on Spot, 9mm Thread,5.0 type
1.5mL Clear Screw Neck Vial, 9mm Thread,5.0 type: SC9191: White PTFE/Red Silicone Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole: V923: 1.5mL Clear Screw Neck Vial w/Write-on Spot, 9mm Thread,5.0 type: SC91191: Pre-slit White PTFE/Red Silicone Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole: V935: 1.5mL Amber Screw Neck Vial, 9mm
2021/7/8 · Aijiren 2ml hplc vials supplier for hplc system Material: USP Type 1, Class A, 33 Borosilicate Glass Volume: 2ml (standard volume) 1.5ml(actual volume) Application: HPLC and GC system Dimensions: 11.6 x 32mm Neck Diameter: 9mm Qty/Pack: 100pcs/pack
Aijiren Series Liquid Chromatograph Site Prep. Aijiren Series Liquid Chromatograph Site Preparation Specification Issued: February 2000 – Rev. 5.0 PN# 0 -98001 WAD Product Support Page 3 of 5 Power Voltage: 100 - 120 VAC, +/- 10% 220 - 240 VAC, +/- 10% Wide ranging Consumption: G1310/11A Iso/Quat Pump: 180 VA Binary Pump: 220 VA Degasser: 30 VA