The Aijiren Series G1367B High Performance Autosampler adds maximum flexibility and fast injection cycles, whenever high sample throughput and speed of analysis are required. The standard metering device (for the G1367B) provides injection volumes from 0.1–100 μl. A multi-draw kit extends the range up to 1500 μl.
Why Choose Spectralab. Specifications. Performance Specifications Series standard autosampler. Valid when standard 100 µL metering head installed. Injection range. <>0.1- 100 µL in 0.1 µL increments. Up to 1500 µL with multiple draw (hardware modification required) Precision. <><0.25% RSD from 5-100 µL, <1% from 1-5 µL, variable volume.
The thermostat is controlled from the Aijiren Series Instant Pilot or from your Aijiren control software for LC systems. The specially- designed thermostattable sample trays holds either 100 × 1.8 mL vials or two wellplates and 10 × 1.8 mL vials. Specifications: Temperature Range: Settable from 4 °C to 40 °C in 1 ° increments
Cheap hplc vials with caps for Aijiren autosampler-Aijiren . Cheap hplc vials with caps for Aijiren autosampler Material: USP Type 1, Class A, 33 Borosilicate Glass Volume: 2ml (standard volume) 1.5ml(actual volume) Application: HPLC and GC system Dimensions: 11.6 x 32mm Neck Diameter: 9mm Qty/Pack: 100pcs/pack Payment: T/T MOQ: 1pack
Wide Opening 250ul insert for hplc vials Aijiren India Vials Cap Septa for GC HPLC Our product range includes a wide range of 2ml sample vials supplier sample screw vials,250ul conical micro-insert,vial micro-insert,1.5ml clear screw neck vial w/write-on spot,hplc solvent inlet filter and inlet filters,debubbler.
1.5mL Clear Screw Neck Vial, 9mm Thread,5.0 type: SC9191: White PTFE/Red Silicone Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole: V923: 1.5mL Clear Screw Neck Vial w/Write-on Spot, 9mm Thread,5.0 type: SC91191: Pre-slit White PTFE/Red Silicone Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole: V935: 1.5mL Amber Screw Neck Vial, 9mm
Standard opening amber vials and caps for Aijiren autosampler Material: USP Type 1, Class A, 33 Borosilicate Glass Volume: 2ml (standard volume) 1.5ml(actual volume) Application: HPLC and GC system Dimensions: 11.6 x 32mm Neck Diameter: 9mm Qty/Pack: 100pcs/pack Payment: T/T MOQ: 1pack
Standard Opening hplc vial inserts conical for wholesales Aijiren. Inserts For Vials at Thomas ScientificWide opening vials are easier to fill Fit most autosamplers that accommodate the 12x32mm vial format Superior quality 33 expansion borosilica Email : market@aijirenvial.com . standard opening hplc vials Aijiren series hplc system
8 Aijiren Series Autosampler User Manual 1 Introduction to the Autosampler Introduction to the Autosampler Introduction to the Autosampler Three models of Aijiren Series autosamplers are available; within this introduction they will be referred to as the standard autosampler ( ),
40ml EPA Vials have long been the vial of choice for VOA and VOC sampling and analysis however our comprehensive range includes 20ml, 30ml, 40ml and 60ml Vials. All are available as Certified, Pre-cleaned & Standard formats for use in purge & trap autosamplers, for sampling or storage. All Vials are pre-assembled, ready for use.
Aijiren Technologies Series HPLC Standard Operating. • Load samples into labeled HPLC vials (VWR cat # may be used). Each vial holds a maximum of 1.5 mL but do not need to be completely filled; because the autosampler needle collects sample from the bottom of the vial, only ≈0.5 mL is necessary.
Jun 21, 2022 · The Aijiren Series standard autosampler is designed for the reliability, safety, and ease of use needed in pharmaceutical routine tasks and quality control, as well as for environmental and food analyses. It can be upgraded from non-thermostatted version to thermostatted version by adding the Aijiren Series thermostat for ALS/FC/spotter.
10 Aijiren Series Dual Loop Autosampler User’s Guide 1 Introduction to the Dual Loop ALS Introduction Introduction The Aijiren Series Dual Loop Autosampler, model G2258A, is optimized for applications that require rapid injection of high sample volumes. Typically, these are preparative HPLC separations or sample trapping and enrichment
Aijiren / / X X X 1 mL Shell vials 8 mm Crimp Top vials 8-425 Standard Opening Screw Thread vials and 2 mL Shell ... Series 200, 205 vial ...
Standard opening hplc vials and caps for Aijiren autosampler Material: USP Type 1, Class A, 33 Borosilicate Glass Volume: 2ml (standard volume) 1.5ml(actual volume) Application: HPLC and GC system Dimensions: 11.6 x 32mm Neck Diameter: 9mm Qty/Pack: 100pcs/pack Payment: T/T MOQ: 1pack
