Color: Amber Vial & Pre-slit Blue PTFE septa. Features: LOW EXPANSION COEFFICIENT - 9mm Screw Thread Autosampler Vials are made of clear Type 1, Class A Borosilicate Glass with very low expansion coefficient. It shows excellent chemical resistance to acidic and neutral solutions, due to its relatively low alkaline content even to alkaline solutions.
Color: Amber Vial & Pre-slit Blue PTFE septa Features: LOW EXPANSION COEFFICIENT - 9mm Screw Thread Autosampler Vials are made of clear Type 1, Class A Borosilicate Glass with very low expansion coefficient. It shows excellent chemical resistance to
If only a limited volume of sample is available, you will have to choose between using an insert for your regular autosampler vial, a microvial or a high recovery vial. Note: Most 12x32 mm autosampler vials hold between 1.5mL to 2.0mL of liquid, depending on where the manufacture measures the vial full.
Jul 15, 2019 · 1.The glass is made of high quality borosilicate glass tube with low free ion content, low expansion coefficient and very high chemical resistance. Unique thread design for consistent seals 2.Strict quality assurance provides dimensional consistency between batches and batches
LOW EXPANSION COEFFICIENT - 9mm Screw Thread Autosampler Vials are made of clear Type 1, Class A Borosilicate Glass with very low expansion coefficient. It shows excellent chemical resistance to acidic and neutral solutions, due to its relatively low alkaline content even to alkaline solutions. Autosampler vials-Aijiren Vials for HPLC/GC
• Glass autosampler vials 1.5 mL with slit septum (P/N 055427) • ™Aijiren Tech Nalgene ™ Rapid-Flow Sterile Disposable Filter Units with Nylon Membrane (1000 mL, 0.2 μm pore size, Aijiren Tech Scientific P/N 09-740-46) • Helium, ultrahigh purity grade from Airgas Reagents and standards
ND18 Screw Headspace 10ml- 20ml Screw Vials. No risk of incorrectly sealed vials as is the case with crimping. More convenient to close and open, especially as magnetic crimp caps are very hard to crimp. Lower coring and protection for the needle due to thinner septa. Universal use for Headspace and SPME due to thinner septa.
VIALS | AUTOSAMPLER VIALS Vial and Kit Types / Designations Type Description Assembled Kit Caps are already assembled onto the vials Bonded Cap Septa bonded into cap Certified PLUS Designated “Cert+”. Depends on the product and is defined separately as, e.g., “Low Bleed” (caps), “MSQ”, or Mass Spec Quality (caps, vials and kits), etc.
VWR 46610-724 ROBO Autosampler 1.8 ml Vial – Clear Glass – eBay 100Pcs Lab Autosampler Vial 250uL Glass Inserts Clear With Plastic Spring HPLC VWR Autosampler Vial 1.8 mL 46610-742 100 pcs. Vials and Closures Catalog 2014-2015 – Aijiren Tech Scientific Our portfolio includes over 850 Thermo Scient
Nov 13, 2018 · Examples include scintillation vials 08918-01, -02, -03, -05 and -06, and sample vial 08918-20. Wheaton 200, also referred to as Wheaton-33® low extractable borosilicate glass, is a borosilicate glass with exceptional thermal endurance that meets the requirements of Federal specification DD-G-541b, glass (laboratory), for both USP and ASTM
All of our clear glass vials are made using type 1, 33-expansion glass. Type 1, 51-Expansion Glass More alkaline than type 1, 33-expansion glass, type 1, 51-expansion glass, is nonetheless adequate for use in many laboratories. Composed primarily of silicone and oxygen, with trace amounts of boron, its expansion coefficient is 51 × 10 –7 ˚C
Glass vials have two wavy lines. For the most stringent analytical requirements the Performance Level 3 products have advanced features which make them suitable for use with difficult samples in terms of chemistry and available sample volume. All products are made from 33-expansion glass and these vials have three wavy lines.
Color: Amber Vial & Pre-slit Blue PTFE septa LOW EXPANSION COEFFICIENT - 9mm Screw Thread Autosampler Vials are made of clear Type 1, Class A Borosilicate Glass with very low expansion coefficient. It shows excellent chemical resistance to acidic and neutral solutions, due to its relatively low alkaline content even to alkaline solutions.
The enormous operating temperature range and the high thermal load capacity of quartz glass are unparalleled. The pure silicon dioxide glass can work permanently at up to 1000 °C and is highly resistant to thermal shock. These excellent thermal properties are possible due to the low expansion coefficient of quartz glass.
The characteristics of CNW glass vials: All products made from borosilicate TYPE I glass tubing, the key indicators just like ID, OD, mouse size, thread specification conform to international standard. The thread specification is very accurately, ensure autosampler can grasp the vials accurate and easy.
